Fast SheetsTeam Technical Services
Company ProfileWhat's NewProductsServicesLineCardHome Page
Sensycon TZID
Sensycon TZID-C
Data Flow Positioner
Regulator Sizing
Control Valve Sizing
Guage Selection
Diaphragm Seals
Temperature Devices
Hand Held TS11

Data Flow Positioners

Programmable Options:
The program mode is entered from the run mode by pressing the SEL switch for 3 seconds. The display will show PROG for 1 second and then the CodE screen will appear prompting the entry of the security code (default is 1000). Enter your code and press SEL. The display will alternately display Addr and the communication address previously assigned. Press the up button repeatedly to scroll the programmable options. Press SEL for 3 seconds at any time to return to the run mode.
OPTION FUNCTION DISPLAY SYMBOL DISPLAY CHOICE
1 Output Current Range Occur 4-20 or 0-20
2 Setpoint Direction Sdir riSE or FALL
3 Setpoint Split Range
START		 SPrS 0.0 to 99.9%
(splits open)
4 Setpoint Split Range
END		 SprE 0.0 to 99.9%
(splits closed)
5 Setpoint Range
Time to OPEN		 OPEn 0-200 sec. CCW
6 Setpoint Range
Time to CLOSE		 CLOS 0-200 sec. CW
7 Setpoint Curve Function SFe Lin or FrEE
8 Positioner Dead Band dEbA 0.1 to 10.0% of Auto
9 Loss of Signal Position
and Delay Time		 SPOS HOLd and SPt
10 Power-On Position
and Delay Time		 PPOS HOLd and PPt
11 Electronic Travel Stops
Upper		 yA 0.0 tp 100.0%
12 Electronic Travel Stops
OPPER		 yE 0.0 to 100.0%
13 Tight Valve Shutoff yCLS yES or no
14 Full Open Valve yOPn yES or no
15 Brake On Time br .010 to 0.99 sec.
16 Cycle Time Cys Actual Time to
Open & Close
17 Accumulated Number
of Cycles		 CyCn 0 to 9,999,000,000
18 Position Deviation Alarm UPPER Ahi 0 to 100%
19 Position Deviation Alarm LOWER Alo 0 to 100%
20 Restore Default Values PrSt yES or no
21 Setpoint Deviation Alarm ADE 25 Seconds

[Our Profile] [Fast Sheets] [What's New] [Products] [Services] [Line Card] [Home]
Send mail to info@teamtechnical.com with questions or comments about this web site.